Don’t always rely on the manufacturer’s advertised length; you’ll want to measure it yourself to get the most accurate length for the proper size cover.
You will need:
- Tape measure up to 50 feet
- Paper and pencil to write the measurements down
- A helper to hold one end of the tape measure
Step 1.
Measure from the front of the pontoon to the rear in the straightest line possible. Make sure to include anything that sticks out past the end like a ladder. This is your beam length.
Step 2.
Measure the width of the pontoon, typically from one side to the opposite side. This is your beam width.
And that’s it! It’s always preferred to have a cover fit more snug than too loose, which can be susceptible to wind flapping.
To shop Pontoon Boat Covers, click or tap here.
my pontoons stick out past the deck, 18″ in front and 32″ in back. Do I just measure the deck?
Yep, I would measure the complete length of the deck for the proper cover fit. I hope this helps!